Using Beaumont Wood Finishes
Beaumont Heritage Oil
Our Flagship product is a highly effective penetrating oil finish. It leaves a smooth-feeling, satin finish.
Surface Prep
Sand wood to 220 grit. If applying over stain, wait at least 12 hours after staining. Ensure surface is clean and dry before applying.
Application Process
Pour a small amount directly on to your workpiece — a little goes a long way. Apply directly with squeegee, or card spreader. Once the surface is fully wetted, work it thoroughly into the grain using an ultra-fine (white) non-woven pad.
Let sit for 15 minutes (or up to 3 hours), then wipe off all excess with a clean cloth. Repeat as desired. Wait 24 hours between coats.
Avoid contact with moisture for 7 days. Fully cured in 10–14 days depending on temperature, humidity, and airflow.
Safety Notice
Use as directed. Do not ingest. Avoid contact with eyes and prolonged skin exposure. Keep away from heat, sparks, and open flame. Dispose of used rags and applicators in a sealed metal container filled with water, as they may spontaneously combust if improperly stored. Keep out of reach of children and pets.
----------------------------------
Beaumont Master Wax
A foundational, structured oil/wax product that melts during application.
Surface Prep
Sand wood to 220 grit. If applying over stain, wait at least 12 hours after staining. Ensure surface is clean and dry before applying.
Application Process
Scoop a small amount using a knife, strip of wood, or finger — a little goes a long way. Apply directly with squeegee, or place in a thin cloth and use the balled-up surface as the applicator. Work it thoroughly into the grain using an ultra-fine (white) non-woven pad, using friction to melt it into the grain. Once the surface is fully wetted, let sit for 15 minutes (or up to 3 hours), then wipe off all excess with a clean cloth. After a few hours, you may buff with a soft cloth or electric buffer. Wait 24 hours between coats. Repeat as desired. Avoid contact with moisture for 7 days. Fully cured in 10–14 days depending on temperature, humidity, and airflow.
Safety Notice
Use as directed. Do not ingest. Avoid contact with eyes and prolonged skin exposure. Keep away from heat, sparks, and open flame. Dispose of used rags and applicators in a sealed metal container filled with water, as they may spontaneously combust if improperly stored. Keep out of reach of children and pets.
----------------------------------
Beaumont Food-Safe Finish
Sand wood to 220 grit. If applying over stain, wait at least 12 hours after staining. Ensure surface is clean and dry before applying.
Surface Prep
Sand wood to 220 grit. If applying over stain, wait at least 12 hours after staining. Ensure surface is clean and dry before applying.
Application Process
Scoop a small amount using a knife, strip of wood, or finger — a little goes a long way. Apply directly with squeegee, or place in a thin cloth and use the balled-up surface as the applicator. Once the surface is fully wetted, work it thoroughly into the grain using an ultra-fine (white) non-woven pad, using friction to melt it into the grain. Let sit for 15 minutes (or up to 3 hours), then wipe off all excess with a clean cloth. After a few hours, you may buff with a soft cloth or electric buffer. Wait 24 hours between coats. Repeat as desired.
Safety Notice
Use as directed. Do not ingest. Avoid contact with eyes and prolonged skin exposure. Keep away from heat, sparks, and open flame. Dispose of used rags and applicators in a sealed metal container filled with water, as they may spontaneously combust if improperly stored. Keep out of reach of children and pets.
----------------------------------